Description
Flexion X60 Ultra-Flexible Filament is the softest filament available on the market today, by far. At Shore 60A, it is much softer than Ninjaflex or Filaflex. It is about the flexibility of an inner-tube. This materials is perfect for that ultra-flexible application: rubbery toys, comfortable wearables, parts that need to stretch to fit, gaskets, releasable molds, and so much more.
- Made by COEX in the USA to the highest quality
- Non-toxic.
- Incredible flexibility and elasticity.
- Diameter of 1.75; variations ± 0.05 mm; roundness ± 0.05 mm
- Only printable with the Flexion Extruder. Recommended for use with the standard hotend (not HT).
- Shipped vacuum-sealed with dessicant to keep it free of moisture (not prone to moisture absorption, but best to be careful)
Recommended print settings:
- Print on unheated, solvent-cleaned polymer surface such as Buildtak, PEI, Kapton, or Vinyl hairspray
- Recommended print temperature 215°C ± 5°C (NEVER approach or exceed breakdown temperature of 230°C)
- Print speed – up to 40mm/s. Start very slow (20mm/s) and work up from there. Slow down for bridging and infill.
- Extrusion multiplier – up to 1.25 compared to rigid material, depending on tension on the filament
- Extrusion width – 105% of nozzle diameter (0.42 for a 0.4mm nozzle)
