Flexion for E3D Retrofit kit for E3D Hotend
$99.00
3D printer extruder retrofit kit for E3D v6 hotend (1.75mm). This allows the use of the Flexion Extruder with the excellent E3D hotends – enabling precision extrusion of virtually every available filament from Nylon to ultra-flexible Shore 50A. This uses the same mounting hole pattern as the E3D extruder, and also has a couple mounting holes in the front (see drawing). It includes a PTFE tube cut to length for the E3D v6 hotends. So you’ll have all the same advantages of precision, supported, reliable filament driving with the flexibility to print at much higher temperatures. This kit is appropriate for RepRap and Lulzbot printers by following instructions here.
Includes:
- Flexion extruder
- E3D mounting block
- Precision cut PTFE guide tube (plus a spare), and alignment collar.
- Clamp plate and mounting screws
- Spare brush
- Spare nozzles: 0.2, 0.3, 0.4, and 0.5mm orifice
Out of stock
Description
Flexion extruder with an E3D mount. Comes with everything shown in the box:
- Flexion extruder
- E3D mounting block
- PTFE tube that fits the E3D v6 hotend (plus a spare)
- Clamp plate and mounting screws
- Spare brush
- Spare nozzles: 0.2, 0.3, 0.4, and 0.5mm
Does NOT include the stepper motor or hotend.. Those can be ordered here.
Additional information
| Weight | 2 oz |
|---|---|
| Includes | Mounting block and mounting hardware Note: does not include stepper motor or hotend |
Reviews
There are no reviews yet.