by diabase | Dec 14, 2016 | Uncategorized |
A lot of people have asked about the Flexion Extruder on the Zortrax M200 clones: Wanhao Duplicator i6 and Maker Ultimate. We have created a custom kit to allow the installation of the Flexion Extruder, and the fast, easy printing of flexible filament like Ninjaflex...
by diabase | Aug 8, 2016 | Uncategorized |
UPDATE 3/4/2107 – We now sell X60 Ultra-flexible filament in our shop. It’s even MORE flexible than the Jellyfish material described below. It is truly incredible to print with, and it opens a whole new world of potential parts you can make. Try it today!...
by diabase | Jun 8, 2016 | Uncategorized |
One question we are frequently asked is: Why did we choose the rigid cam tensioning method over the more typical spring-loaded design? In order to answer this question, we have to look at the system as a whole. What we are after in the end is accurate control of the...
by diabase | May 24, 2016 | Uncategorized |
Now you can print Ninjaflex and X-60 Filament on your Flashforge Dreamer with the Flexion Extruder! What you will need 2x M3x8 Flat Head screws (add a comment to your order and we will include them for you) Phillips head screwdriver Tweezers Instructions: Make sure...
by diabase | May 9, 2016 | Uncategorized |
Roy Kirchner of the Ultimate 3D Printing Store will be featuring the Flexion Extruder at his booth at Rapid 2016 in Orlando. Make sure you stop by his booth to check everything out. There will be a sample of the highly-flexible “Jellyfish” and...
by diabase | Apr 24, 2016 | Uncategorized |
Here is a photo of the Plastic Scribbler Asterid with a Flexion Extruder mounted to the X-carriage. It is possible to modify the printer and print Ninjaflex on a Plastic Scribbler Asterid at full-speed. However, these instructions are incomplete. If you would like to...
Recent Comments
retrofit kit for dual extruder
retrofit kit for single extruder
retrofit kit for single extruder