fbpx

Why the Cam Dial for compression control?

One question we are frequently asked is: Why did we choose the rigid cam tensioning method over the more typical spring-loaded design? In order to answer this question, we have to look at the system as a whole.   What we are after in the end is accurate control of the...

Flexion Extruder on the Flashforge Dreamer

Now you can print Ninjaflex and X-60 Filament on your  Flashforge Dreamer with the Flexion Extruder! What you will need 2x M3x8 Flat Head screws (add a comment to your order and we will include them for you) Phillips head screwdriver Tweezers Instructions: Make sure...

See us at RAPID 2016

Roy Kirchner of the Ultimate 3D Printing Store will be featuring the Flexion Extruder at his booth at Rapid 2016 in Orlando. Make sure you stop by his booth to check everything out. There will be a sample of the highly-flexible “Jellyfish” and...

Plastic Scribbler Asterid Mounting Instructions

Here is a photo of the Plastic Scribbler Asterid with a Flexion Extruder mounted to the X-carriage. It is possible to modify the printer and print Ninjaflex on a Plastic Scribbler Asterid at full-speed. However, these instructions are incomplete. If you would like to...

JGAurora Z 605S Flexion adapter

To install the Flexion Ninjaflex extruder on your JGAurora i3, and start printing Ninjaflex at full-speed, follow the instructions here: Instructable for Flexion Extruder Mount This relies pretty heavily on the ability to cut metal parts, including drilling and...